Mitsubishi's dedication to new technology means that multi-zone mini split systems are now a year-round comfort solution for homes in freezing climates. This low ambient system uses a Hyper-Heating H2i MXZ-3C30NAHZ2 outdoor condenser to provide efficient cooling and subzero heating through three advanced MSZ-FH wall mounted indoor units. These indoor units feature Mitsubishi's i-See sensor, which automatically detects where heating or cooling is needed. Three wireless remote controllers guarantee convenient comfort by allowing you to control the temperature in individual rooms. With multiple operating modes, multiple fan speeds, and multiple airflow directions, this is a system that fits the needs of nearly any home.
Low and negative ambient temperatures don't bother the MXZ-3C30NAHZ2. It is rated for 100% heating capacity at 5° F and continues to provide heating in outdoor conditions as low as -13° F.
Integrated Base Pan Heater
MXZ-C outdoor condensers have a factory-installed base pan heater in the drain pan. This prevents condensate from freezing and damaging the unit in frigid climates.
Precision Temperature Control Technology
This condenser is equipped with advanced inverter technology. By adjusting compressor speed and refrigerant flow, these components match the output of the condenser to the active zones. This provides precise temperature control and incredible efficiency.
Each MSZ-FH indoor unit has an i-see Sensor 3D that monitors its zone for changes in temperature and occupancy. If an underserved area is detected, an MSZ-FH will temporarily adjust airflow to ensure complete comfort throughout the zone.
Mitsubishi's i-see technology can also detect a room's current occupancy. Through the use of targeted airflow, and adjusting the temperature of an empty room, the i-see sensor will conserve energy and save you money.
Mitsubishi's hot start technology prevents cold drafts by delaying indoor unit fan operation until the heat exchanger has warmed up.
Advanced Filtration System
With three unique filters inside the MSZ-FH indoor units, the air in your zones is not only being conditioned, but it is also actively being cleaned. Three levels of filtration will keep foul odors and harmful bacteria from floating around your home.
Mitsubishi's Smart Set function allows you to save a comfort profile consisting of a temperature down to 50° F, fan speed, and airflow direction for each indoor unit. These profiles can be activated with a single press of the Smart Set button.
The powerful setting on an MSZ-FH indoor unit makes it easy to get your zones to the perfect temperature quickly. When it is activated, a unit temporarily increases refrigerant flow and fan speed to provide quick comfort through rapid heating or cooling.
Econo Cool Mode
By slowly adjusting the cooling set point and swinging the horizontal vanes, an MSZ-FH mini split indoor unit can improve the efficiency of cooling operations without compromising the comfort provided.
When the indoor unit is run in dry mode, it will remove extra moisture from the room. This improves your comfort and reduces both mold growth and the chance of property damage in the conditioned space.
Optimal air flow is easy with Mitsubishi's MSZ-FH mini split indoor units thanks to the vane control option. This provides five horizontal vane positions, an auto mode, and a swing mode. Four way vane control helps provide unmatched comfort.
This product requires the following accessories for installation:
Adding these accessories to your order will provide a complete, ready-to-install mini split system.