Danfoss RA2000 Thermostatic Radiator Valve, Angle - 1-1/4" FPT x MPT Union Tailpiece Connections
The Danfoss Global Group is a renowned leader in research, development, production, sales and services of mechanical and electronic components for a wide variety of industries. Their dedication to reach goals with a minimal consumption of raw materials and energy, have the least possible impact on the environment and make the most efficient use of resources has made them one of the most sought after brands globally. They have a long tradition for social responsibility towards everyone involved in the industry; clients, customers, employees and the surrounding environment. By being active in sustainable global development, Danfoss understands that social and environmental responsibility and climate considerations go hand-in-hand with healthy business development.
RA 2000 Thermostatic Radiator Valves regulate the flow of hot water or low pressure steam through free-standing radiators, baseboards, or convectors in hot water and two-pipe steam systems. Operators and valves are packaged separately to allow an installer an ability to select a suitable combination for each application.
Danfoss 013G8031 RA Series Thermostatic Radiator Valve Features:- RA 2000 valves are fitted with a packing gland assembly that is replaceable while the system is in operation. The packing gland is fitted with a grease cup to ensure the o-ring packing is lubricated for life
- Sturdy EPDM rubber valve disc provides a positive seal against the valve seat at differential pressures of up to 15 PSI in hot water heating systems, while 15psig for low pressure steam systems
- Plastic cap supplied to protect the valve pushpin can provide manual control of the valve during installation. If manual operation is required, a separate hand knob is available as an accessory
- Valves remain normally open with no operator mounted
- Replaceable packing assembly while system is in operation
- Non-electric thermostatic radiator valve conforms to ASHREA/ANSI standard 102-1983
- Same valve body can be used for both hot water and low pressure steam applications
- Patented vapor charged bellows for quick response from valve mounted operators
- "Snap-action" mechanism for standard valve mounted operators for ease of installation and removal without the use of tools
- Valve Orientation: Angle
