Flanders Rigid-Air - 20'' x 24'' x 6'' - Rigid Air Filters - MERV 10 - Qty. 2
Share
+Share This Product
Product Description
Specs
1
Reviews
How-To Articles
Manuals
Product Description
+−
Features
Features
***Shipping Delay*** All Flanders products will be unavailable for shipment until May 2, 2019. The Flanders Rigid Air Series PRP55S0406 Rigid Air Filter is a MERV 10 rated filter designed for use in most commercial and industrial HVAC systems where medium and high efficiency filtration is required. These 20" x 24'' x 6" rigid filters are held into place by plastic pleat separators in a box type frame. It is constructed with a 55% ASHRAE efficient synthetic media and a 24 gauge corrosion-resistant steel frame. The filters can operate with variable air speeds up to 375 FPM in temperatures up to 180 degrees Farhenheit. Rigid Air filters can be installed in Flanders PF-1 Holding Frames, K-Trac Filter Framing Modules, and Surepleat Side Access Housings or similar hardware.
High Dust Holding Capacity
A high dust holding capacity extends the service life of your filter by allowing it to retain high quantities of dust before replacement.
Pleat Separators
Pleat separators allow rigidity in your filters making them suitable for variable air volume systems.
UL 900 Listed
Filters are flame resistant. When clean, air filters do not produce flame or extensive sparks when subjected to a flame exposure test.
Product Compatible With
Flanders PF-1 Holding Frames
K-Trac Filter Framing Modules
Surepleat Side Access Housings
Specifications
General Information
Product Line
Rigid Air
Material
Synthetic Media
Box Quantity
2
UPC
031949170028
Performance
Filter Efficiency
10 MERV
Dimensions
Nominal Height
20 Inches
Nominal Width
24 Inches
Nominal Depth
6 Inches
Product Weight
16 Pounds
Actual Height
19 3/8 Inches
Actual Width
23 3/8 Inches
Actual Depth
5 7/8 Inches
Features
Features
***Shipping Delay*** All Flanders products will be unavailable for shipment until May 2, 2019. The Flanders Rigid Air Series PRP55S0406 Rigid Air Filter is a MERV 10 rated filter designed for use in most commercial and industrial HVAC systems where medium and high efficiency filtration is required. These 20" x 24'' x 6" rigid filters are held into place by plastic pleat separators in a box type frame. It is constructed with a 55% ASHRAE efficient synthetic media and a 24 gauge corrosion-resistant steel frame. The filters can operate with variable air speeds up to 375 FPM in temperatures up to 180 degrees Farhenheit. Rigid Air filters can be installed in Flanders PF-1 Holding Frames, K-Trac Filter Framing Modules, and Surepleat Side Access Housings or similar hardware.
High Dust Holding Capacity
A high dust holding capacity extends the service life of your filter by allowing it to retain high quantities of dust before replacement.
Pleat Separators
Pleat separators allow rigidity in your filters making them suitable for variable air volume systems.
UL 900 Listed
Filters are flame resistant. When clean, air filters do not produce flame or extensive sparks when subjected to a flame exposure test.