How to Pick the Perfect Mini Split Wall Mounted Indoor Unit
Wall mounted units are the most commonly found, most affordable option for indoo...
Hover to zoom
1 Of 5
Fujitsu - 12k BTU Cooling + Heating - RL2 115V Wall Mounted Air Conditioning System - 16.0 SEER
Model:
12RL2
+
Share This Product
Recommended Accessories
Expert Recommended Accessories
Selected by Chris, our Expert
Required Accessories
9
These accessories are required to properly setup/install this product.
Optional Accessories
10
Features
- Inverter Technology
- The 12RL2 outdoor condenser uses an inverter to drive the compressor, allowing it to match its output to the amount of heating or cooling required by a space, even as conditions change. This enables the system to maintain a more stable temperature.
- Timer Function
- With this unit, you can set a sleep timer to gradually decrease the heating or cooling output after you have gone to bed. This timer allows you to curtail energy use without sacrificing comfort.
- Dehumidify and Cool
- Dry Mode demonstrates the ASU12RL2's versatility. In addition to providing moderate cooling, dry mode also dehumidifies your zone.
- Airflow Control
- The airflow direction of this indoor unit may be set to swing automatically between its seven vertical positions. This disperses the hot or cold air evenly across your zone, resulting in consistent and thorough heating and cooling.
- Concentrated Heating and Cooling
- The 12RL2 mini split system has a powerful operation mode. This operating mode runs your indoor unit at maximum power for up to twenty minutes or until your zone reaches the desired temperature, whichever occurs first.
- Quiet Operating Mode
- The ASU12RL2 may be set in a quiet operating mode. This operating mode limits airflow slightly to reduce fan noise from the unit, allowing you to enjoy supremely quiet comfort.
- Economy Mode
- The 12RL2 system features an Economy Mode restricts the unit's maximum output to decrease energy use and increase savings. This mode also increases the unit's dehumidification capabilities during cooling operations and in Dry Mode.
- (1) Fujitsu - 12k BTU - RL2 Outdoor Condenser - Single Zone Only (AOU12RL2)
- (1) Fujitsu 12k BTU Wall Mounted Unit - For Single-Zone (ASU12RL2)
- Line Set - This double insulated tubing transfers refrigerant efficiently between your outdoor condenser and indoor unit.
- Drain Tubing - Drain tubing facilitates the reliable and effective removal of condensate from your system. It connects your indoor unit to drain locations of your choosing.
- Disconnect Box & Electrical Whip Kit - The Disconnect Box & Whip Kit provides a safe and simple way to connect your outdoor condenser to your fuse box.
- Connecting Cable - This durable, insulated cable provides power to your indoor unit from your outdoor condenser.
- Base Pan Heater - The base pan heater prevents ice from building up on the outdoor unit. Excessive ice build will lead to performance issues and could damage your unit.
- Outdoor Condenser Plastic Pad or Wall Bracket - We recommend outdoor condensers should not be placed directly on the ground. An outdoor condenser pad or wall bracket will provide a stable way to mount your condenser free from obstructions and debris.
Fujitsu has been providing efficient and responsible heating and air conditioning solutions for decades. Their experience and dedication can be seen in the 12RL2 wall mounted mini split system. This system is a single zone heating and cooling solution for use in 115 volt electrical systems. If you are looking to provide heating and cooling for an individual space, or to supplement existing heating and air conditioning equipment, the 12RL2 mini split system is a reliable and efficient choice for low voltage applications. This system has an array of effective operating modes that allow you to customize operations to suit your comfort, making it an intelligent addition to any home or business.
Product Includes
Product Note
This product requires the following accessories for installation:
California residents see
Warning: This product can expose you to chemicals including Formaldehyde (gas) which is known to the State of California to cause Cancer
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
For more information go to: www.p65Warnings.ca.gov
Specifications
Product Includes
- (1) Fujitsu - 12k BTU - RL2 Outdoor Condenser - Single Zone Only (AOU12RL2)
- (1) Fujitsu 12k BTU Wall Mounted Unit - For Single-Zone (ASU12RL2)
12RL2
General Information
Type
Wall Mounted
Product Line
Halcyon
Operating Mode
Heating and Cooling
Number of Zones
1
Refrigerant Type
R-410A
Indoor Unit Size(s)
12
Outdoor Unit Size
12000 BTU
Line Set Size
1/4" x 3/8"
Performance
Cooling BTU
12000
Cooling Capacity
12000 BTU
Heating Capacity
14000 BTU
SEER
16
EER
10
HSPF
9
Minimum Operating Temperature
15 F
Maximum Operating Temperature
15 F
Minimum Outdoor Temperature for Heating
15 F
Minimum Outdoor Temperature for Cooling
15 F
Electrical Data
Voltage
115 Volts
Phase
1
Frequency
60 Hz
Minimum Circuit Ampacity
15 Amps
Recommended Breaker Size
20 Amps
Dimensions
Suction Connection Size
3/8 Inch
Liquid Connection Size
1/4 Inch
Product Weight
85 Pounds
Shipping Weight
92 Pounds
Certifications
ETL Listed
Yes
Warranty Information
Warranty
5 Years
Compressor Warranty
10 Limited Years
AOU12RL2
General Information
Type
Outdoor Condenser
Product Line
RL2
Operating Mode
Heating and Cooling
Multi-Zone Compatible
No
Refrigerant Type
R-410A
Installation Location
Outdoor
Performance
Cooling BTU
12000
Maximum Sound Level
51 dB
Low Ambient Heating
No
Minimum Outdoor Temperature for Heating
15 F
Minimum Outdoor Temperature for Cooling
15 F
Electrical Data
Voltage
115 Volts
Phase
1
Frequency
60 Hz
Recommended Breaker Size
20 Amps
Dimensions
Maximum Line Length
66 Feet
Gas Connection Size
3/8 Inch
Liquid Connection Size
1/4 Inch
Product Height
21 1/4 Inches
Product Width
26 Inches
Product Depth
11 17/48 Inches
Product Weight
69 Pounds
Shipping Height
24 1/16 Inches
Shipping Width
31 3/8 Inches
Shipping Weight
73 Pounds
Certifications
ETL Listed
Yes
AHRI Certified
Yes
ISO Certified
Yes
Warranty Information
Parts Warranty
5 Years
Compressor Warranty
7 Years
ASU12RL2
General Information
Type
Wall Mounted
Product Line
RL2
Operating Mode
Heating and Cooling
Multi-Zone Compatible
No
Refrigerant Type
R-410A
Remote Control
Wireless
Indoor Unit Size(s)
12
Installation Location
Indoor
Performance
Cooling BTU
12000
Cooling Capacity
12000 BTU
Maximum Air Flow
436 CFM
Minimum Air Flow
191 CFM
Minimum Sound Level
23 dB
Maximum Sound Level
43 dB
Electrical Data
Phase
1
Frequency
60 Hz
Dimensions
Gas Connection Size
3/8 Inch
Liquid Connection Size
1/4 Inch
Product Height
10 5/16 Inches
Product Depth
8 1/8 Inches
Product Weight
16 Pounds
Shipping Width
34 1/4 Inches
Shipping Weight
20 Pounds
Certifications
ETL Listed
Yes
AHRI Certified
Yes
ISO Certified
Yes
Warranty Information
Parts Warranty
5 Years
Reviews
(3)
Fujitsu 12RL2 Reviews & Ratings
Product Q&A
Be the First to Ask A Question
Answered by Chris, the eComfort Product Expert
How-To Articles
What You Should Know About Mini-Split Wiring
Ductless mini splits are one of the most popular and energy-efficient choices f...
How to Pick the Perfect Mitsubishi Mini-Split Condenser
If you're struggling to keep your home or office comfortable, you are not alone....
Manuals
Ask A Question!
*Required Fields
+
Thank You For Submitting Your Question
Your submission has been sent successfully. Please give our experts up to two business days to respond.
Media Gallery
Fujitsu - 12k BTU Cooling + Heating - RL2 115V Wall Mounted Air Conditioning System - 16.0 SEER
Customer Review Images
