Expert Recommended AccessoriesSelected by Bob, our Expert
Required Accessories9
These accessories are required to properly setup/install this product.
Optional Accessories10
Features
Schluter-KERDI-KERECK-F is a pliable waterproofing membrane strip designed to waterproof corners in bath and shower installations. It is covered in an anchoring fleece on both sides, allowing it to be set in place with thin-set mortar.
Vapor Retardant
The Schluter-KERDI waterproofing membrane has a very low water vapor permeance, making it an excellent waterproofing membrane for shower, bath, and steam room installations.
Shaped to Corners
The Schluter-KERDI-KERECK-F waterproofing membrane fits seamlessly into corners, eliminating the need to cut standard KERDI membrane to fit tedious areas.
California residents see
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Parts Warranty Parts WarrantyA warranty is a safeguard from defects in manufacturing and can vary in length and terms. To see the manufacturer's warranty statement, click on the Manuals tab. Learn More
10 Years
Reviews
(1)
Schluter KERECK/FI2 Reviews & Ratings
Customer Photos and Videos
Product Q&A
(1)
Product QuestionsAnswered by Bob, the eComfort Product Expert
How tall are these corners from the floor?
Christina
from Nevada
June 22, 2016
Answer
As you look directly into the corner, the right base leg is 4.75", the left base leg is 4.5" and the back wall (vertical) tabs are 2-3/8".
Was this answer helpful?
Yes
0
No
0
How-To Articles
The Best Way to Waterproof a Shower
With Americans spending more and more time showering, the volume of water hittin...